Wilmington Auto Repair

If your vehicle isn't starting or doesn't sound like it used to when you crank it, the culprit may be the battery.  You may have left a light on, or something plugged into one of charging ports.  Maybe you accidentally left your vehicle in the "on" or "accessory" position when you last got out. Maybe you've left it in the garage or driveway for a long time without starting it.  That can spell the end for a vehicle battery. It's also possible that your battery is just simply too old. There's no standard lifespan of a battery, but 3-5 years is about average, even though some people only get 2 and heavier duty batteries may last many more. It's possible your battery is defective, too.  And it could be your vehicle's charging system isn't recharging the battery.  Whatever the cause, if you're having problems with your battery, it's a good idea to bring it in and have us perform a thorough battery test.  With state-of-the-art testing equipment, a technician wil ... read more

Your vehicle's brakes wear out.  It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking.  Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor.  The friction between them enables you to stop, and each time you do a little bit of the pad and the rotor wears down. The original brakes on vehicles used a rotor that was thick enough to last through at least two replacements of the pads.  But vehicle manufacturers who want to save costs and weight now make them thinner, and sometimes the rotors have to be replaced after the first pad replacement.  But not always. Vehicle manufacturers specify a minimum thickness to provide safe braking.  Sometimes rather than having to have your rotors replaced, they can be put on a lathe and resurfaced.  In other words, the surfaces of the disc can be slightly shaved off so the sur ... read more

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine. But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine.  One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to. If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you brin ... read more

There's a belt that snakes through your engine.  It's even named for a snake, the serpentine belt.  It'll bite you when it breaks, possibly leaving you stranded.  So, it's good to know a little about this snake-like belt. In early engines, there were lots of belts. They were used to convert the rotating power of the engine to turn a mechanical part.  But engineers had an idea.  Why not consolidate all those belts into one that ran a bunch of different parts simultaneously? Voila!  The serpentine belt. It's found in the front or side of your engine unlike older belts which were often in a V shape, the serpentine belt has ribs on it which more effectively connect with the pulleys that power the other components.  A serpentine belt may power the water pump, power steering pump, alternator, and the air conditioning: all from one crankshaft.  Now, all that's fine when everything is working well and the belt is intact.  But when a serpentine belt ... read more